Custom logo jeans buttons are judged across a whole run rather than on one piece: the motif in the same position every time, the relief standing to the same height, the fine dashed rim detail unbroken all the way round. This article looks closely at two components — a row of star-patterned jeans buttons laid out side by side, and a prong snap cap with a rolled mirror-bright band and a faceted clear stone, set on charcoal twill. What keeps form and spacing steady is the tooling: drawn in CAD/CAM, proved with 3D-printed prototypes, then cut as job-specific high-precision stamping dies on in-house CNC machines. Shapes, motifs and sizes follow a customer’s own drawing under OEM, with jeans buttons in standard 14 / 15 / 17 / 20 / 25 mm and special sizes made to drawing, and every piece inspected in-house before dispatch.

One Run of Star-Patterned Jeans Buttons

Laid out side by side, the star pattern sits in the same place on every piece, the relief stands to the same height, and the fine dashed ring runs unbroken around each rim.

The darker ground and the lighter raised detail hold the same contrast throughout, so a row of buttons on one garment looks even from the first piece to the last.

Jeans buttons are produced in standard 14 / 15 / 17 / 20 / 25 mm, with special sizes made to drawing.

See our jeans buttons range →

A Rolled Band on a Prong Snap Cap

See our prong snaps range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.

A metal snap button supplier in Thailand is read on small things: how a polished cap closes at the rim, how a socket cup holds its spring ring, how evenly a finish runs across one batch. This article looks closely at three components — a mirror-faced snap cap with its matching socket, a four-hole sewing button seated on a wool coat placket, and a plain domed leather rivet with a narrow flange and a short post. Form and finish both come from the tooling: drawn in CAD/CAM, prototyped by 3D printing, then cut as job-specific high-precision stamping dies on in-house CNC machines, with shapes and sizes made to a customer’s own drawing under OEM and every piece inspected in-house before dispatch.

Mirror Finish on a Snap Cap and Socket

The front cap is polished to an even mirror face, the rolled edge closed smoothly round, with no tooling marks left.

Behind it, the socket cup shows the spring ring seated in its groove and a clean round hole through the floor — the result of high-precision dies designed in CAD/CAM and cut on in-house CNC machines.

A consistent surface keeps every Snap Button in a batch looking alike on the garment.

See our snap buttons range →

A Sewing Button on a Wool Placket

A thin metal disc sits flat against heavy wool, so the placket closes cleanly rather than bulging; the rim is rounded, with no sharp edge against the cloth.

The four holes are punched clean through the recessed well, so the crossed thread sits below the rim. The satin silver-toned finish is even, and every piece is inspected 100% in-house before shipment.

Shapes and sizes follow a customer’s own design (OEM). We would be pleased to discuss your requirements.

See our sewing buttons range →

The Plain Dome of a Leather Rivet

The LR leather rivet has a plain cap, so any deviation in form shows at once. The curve must read symmetrical from every side, and the thin ring around the base even all the way round.

That ring is the face that meets the leather once the rivet is set, and the short post below is the anchor. In proportion, the dome sits upright rather than tilted.

We would welcome a conversation about your requirements.

See our leather rivets range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.

A trouser hook manufacturer is judged on how a part behaves once it is set into cloth, not on how it looks in the palm. This article reads three components at close range: a trouser hook lying flat along a waistband seam with its spine upright and two tapered prongs holding in the fabric, an eyelet shown from the side, the top and the inner wall so the rolled rim can be followed right around, and a jeans rivet whose shallow four-sided pyramid head sits on a square base with softly rounded corners. Form and finish are both set by the tooling — drawn in CAD/CAM, prototyped by 3D printing, then cut as job-specific high-precision stamping dies — and shapes or logos can follow a customer’s own drawing under OEM, with every piece inspected in-house before dispatch.

A Trouser Hook on the Waistband Seam

Set flat along the waistband seam, the upright spine takes the pull of the closure while two tapered prongs hold firmly in the cloth.

The load spreads along the band rather than at a single point, so the waistband stays flat with no ridge under a jacket.

Hook components are produced to customer drawings on an OEM basis. We would be pleased to discuss your requirements.

See our trouser hooks range →

One Eyelet, Seen From Three Sides

Side, top and inner wall in one frame: the rolled rim runs unbroken around the circle, the reflective surface stays even, and no seam shows along it.

Flange and barrel must share a single centre — that is what keeps the bore round and the rolled edge pressing evenly onto fabric.

Each form is prototyped by 3D printing before a job-specific high-precision stamping die is cut.

See our eyelets range →

A Pyramid Head on a Square Base

The rivet head is a shallow four-sided pyramid on a square base with softly rounded corners. Each flat facet runs up to a single apex, so the silver-toned surface reads differently from every angle.

Used at stress points on denim pockets and similar garments. Head shapes and logos can be made to the customer’s own design (OEM) using CAD/CAM.

Every piece is inspected in-house before dispatch. We would be pleased to discuss your requirements.

See our jeans rivets range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.

A leather rivet manufacturer is judged on the parts a finished garment hides — the bore, the collar and the underside. This article looks at three of them at close range: a leather rivet whose stem rises from a flat round flange and ends in an open, burr-free bore, a jeans button read from below where turned rings step down around a central collar, and a four-part prong snap set carrying one consistent silver tone. Bore edges, collar openings and finish are all set by the tooling — drawn in CAD/CAM, prototyped by 3D printing and cut on CNC machines within the factory — and shapes or logos can follow a customer’s own drawing under OEM.

A Leather Rivet Bore That Stays True

This Leather Rivet post rises from a flat round flange and ends in a clean circular bore with a smooth, burr-free edge.

That open bore is where the cap takes hold, and a tidy rim lets the two halves close without catching.

Fine concentric rings run across the flange face, which sits level all the way round, holding the stem square.

We would be pleased to discuss your requirements.

See our leather rivets range →

Jeans Button Collar, Read From Below

Concentric turned rings step down around a central collar, the edge clean and even all the way round — detail that only the underside shows.

The collar is open right through to take the tack pin during setting, while the flat base lies close against the fabric.

Shapes and logos are made to the customer’s own drawing — OEM work from design through to tooling.

See our jeans buttons range →

A Four-Part Prong Snap Set

A Prong Snap set comprises four parts — cap, stud, socket ring and prong ring. Each carries the same mirror-bright silver-tone surface, with rolled edges running clean and unbroken. The cap holds a faceted rose-coloured insert seated neatly within its ring.

Matching reflections let the set read as one piece on the garment.

Every piece is inspected 100% in our factory before despatch. We would be pleased to discuss your requirements.

See our prong snaps range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.

Custom denim rivets, snap buttons and metal sewing buttons are judged on the face first — it is the part that stays in view once the garment leaves the line. This article looks at three of them at close range: a low rivet dome carrying a woven lattice, a four-part snap set with a cap polished until it mirrors the light, and a sewing button with a raised rim around a recessed four-hole well. Pattern depth, rim profile and finish are all set by tooling made for the job — drawn in CAD/CAM, prototyped by 3D printing and cut on CNC machines within the factory — and shapes or face detailing can follow a customer’s own design under OEM.

Jeans Rivet Head With a Woven Lattice

A low dome with a smooth rolled rim. Across the face, flat bands pass over and under in a woven lattice, each cut with fine parallel grooves.

In this warm gold tone the recesses hold shadow while the raised bands catch the light, so the pattern still reads from a distance.

Jeans Rivet, product family JR. We would be pleased to discuss your requirements.

See our jeans rivets range →

A Snap Button Cap Polished to a Mirror

Four parts — cap, socket, post and stud. The cap is polished until it mirrors the light, with a rolled edge that runs smooth and unbroken all the way round.

That consistency begins at the die: drawn with CAD/CAM, prototyped by 3D printing, then cut to high precision on CNC machines within our own factory.

Every piece is inspected 100% in-house before despatch.

See our snap buttons range →

Metal Sewing Button on Ribbed Black Fabric

The raised rim steps down into a recessed centre well, keeping the stitching below the surface and clear of direct rub in wear.

The satin silver-toned finish is even across the face, and every piece is inspected 100% in-house before shipment — consistent results across a production run.

Shapes and face detailing can follow a customer’s own design (OEM). We would be pleased to discuss your requirements.

See our sewing buttons range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.

Custom prong snaps, trouser hook bars and eyelets are small parts, and most of what makes them work sits in the edges and the finish. This article looks at three of them in close detail: a four-part prong snap set in one bright tone, the bar plate that a trouser hook engages at the waistband, and the open barrel of an eyelet before it is set into fabric. Tooling is made to the job — drawn in CAD/CAM, prototyped quickly by 3D printing, then cut on the factory’s own CNC machines, so an OEM shape or logo comes out the same through the run.

One Mirror Finish Across Every Prong Snap Part

The set comprises four parts: a cap with a faceted clear stone, a stud, a spring socket and a prong ring — all finished in the same bright mirror tone.

Assembled on a garment, the cap edge and the socket ring read as one continuous circle, with no shift in tone across the front.

Coating is nickel free, with non-toxic colour enamel containing no heavy metals.

See our prong snaps range →

A Trouser Hook Bar Plate With Rolled Rims

The rim is rolled soft right round the plate — no sharp corner to press or chafe the waistband in wear.

A raised ridge frames a slightly recessed centre panel, and two square openings are punched through on the centreline, where the Hook half engages. The finish is fine and even, a low-sheen silver tone against matte twill.

We would be pleased to discuss your requirements.

See our trouser hooks range →

The Eyelet Barrel, Wall and Bore

Nothing has been pressed into fabric yet: the barrel wall runs unbroken around the full circle, the bore stays open end to end, and the lip rolls outward so no edge is left at the mouth.

Wall height and bore roundness must match across every piece — they decide whether an eyelet sets straight and holds firm.

Both are fixed by a job-specific stamping die, cut on our in-house CNC machines.

See our eyelets range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.

Kiatsin is a metal sewing buttons manufacturer working across the small metal parts that fasten and finish a garment. This article gathers three of them: a four-hole sewing button on a jacket cuff, the domed head of a leather rivet, and the shank side of a jeans button. Shapes, sizes and logos are produced to the customer’s own drawing under OEM, designed in CAD/CAM, prototyped by 3D printing, and stamped with precision dies cut on in-house CNC machines.

Four-Hole Sewing Buttons on a Jacket Cuff

A four-hole metal sewing button in a dark copper tone, set on the cuff of a charcoal cotton twill jacket. The outer rim stands proud of a recessed centre well.

The crossed thread sits inside that well, below the level of the rim, and the four openings allow either a crossed or a parallel stitch.

Shapes and sizes can be produced to a customer’s own design (OEM), developed in CAD/CAM with tooling made in our factory.

See our sewing buttons range →

Leather Rivet Domes Begin With the Die

The curve on this leather rivet runs unbroken, and the rim around its base holds an even line all the way round. That consistency comes from a stamping die cut for this shape alone.

Design in CAD/CAM, a rapid prototype by 3D printing, then die work on our own CNC machines. Every piece stamped afterwards repeats the same form.

We would be pleased to discuss your requirements.

See our leather rivets range →

The Shank Side of a Jeans Button

Photographed from the back: a rolled rim closes the edge, and fine concentric rings step down towards the hollow post at the centre.

That post is where the tack fastens. Once set on a waistband, the button sits flat and holds firm. Jeans buttons are produced in 14 / 15 / 17 / 20 / 25 mm, with special sizes made to drawing.

We would be pleased to discuss your requirements.

See our jeans buttons range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.

Kiatsin is a metal eyelets manufacturer producing eyelets, rivets and snap fasteners for garment and leather work, and this article gathers three of them: an eyelet set into canvas, a jeans rivet with a fluted dome head, and a four-part snap set. Shapes and logos are made to the customer’s drawing under OEM, designed in CAD/CAM and prototyped by 3D printing before the high-precision stamping dies for each design are cut on in-house CNC machines. Every piece is inspected 100% in-house before shipment.

Metal Eyelets Set Flush Into Canvas

The rolled edge runs evenly around the whole rim, the polished surface stays consistent, and the flange sits flat against the canvas without lifting or puckering.

Forms are designed in CAD/CAM, prototyped by 3D printing, and produced with high-precision stamping dies made for each job on our in-house CNC machines.

See our eyelets range →

Jeans Rivet With a Fluted Dome Head

A domed head, fluted from a small raised centre out to a scalloped rim, in a polished silver tone that reads as fine lines of light along each groove.

Keeping every flute equally crisp around the ring begins at the drawing stage — CAD/CAM design, a 3D-printed prototype, then precision press tools cut on CNC machines within our factory.

Jeans rivet, product family JR. We would be pleased to discuss your requirements.

See our jeans rivets range →

Four-Part Snap Set With Even Plating

A four-part snap set — cap, socket, post and stud. The domed cap holds a clean mirror finish, the rolled edges run even, and the socket shows a warm tone inside the cup.

That repeatability comes from dies made in our own factory: designed in CAD/CAM, prototyped by 3D printing, machined on in-house CNC.

OEM shapes and logos to your drawing, produced in Bang Bon, Bangkok.

See our snap buttons range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.

Kiatsin is a jeans button manufacturer producing metal buttons and trims for garment and leather work, and this article gathers three of them: a two-tone jeans button, a four-piece prong snap set, and a trouser hook. Jeans buttons are made in five standard sizes, with special sizes produced to the customer’s drawing, and shapes and logos are designed in CAD/CAM and prototyped with 3D printing before the high-precision stamping dies are cut for each design. Every piece is inspected 100% in-house before shipment.

Jeans Buttons in Five Standard Sizes

14, 15, 17, 20 and 25 mm are our standard jeans-button sizes, with custom sizes made to your specification.

The button shown is two-tone: a matte black ring with raised off-white lettering around the face, set against a reddish-brown centre, on an indigo waistband with tan stitching.

Size shapes the proportion of the waistband. Smaller reads refined; larger, more substantial.

See our jeans buttons range →

A Four-Piece Prong Snap Set

A four-piece Prong Snap set: a wide flat cap in a matte blackened finish, a domed stud in the same tone, a pronged post with a bright shaft, and a socket ring in an antique-brass tone.

The matte surface stays even across the face, with no patchy sheen, and the softened rim catches light as one thin, continuous line.

For OEM work, finishes can be matched across the complete set.

See our prong snaps range →

Trouser Hook on a Tailored Waistband

A rolled, curved body follows the waistband; a rounded half-moon base plate sits flush to the cloth, with two flat tapered prongs securing it from the inside.

The satin silver-grey surface gives a soft highlight against dark cloth, and the waistband closes along one clean line.

The Trouser Hook is one of our product families — shape and proportion made to your drawing under OEM.

See our trouser hooks range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.

Kiatsin produces custom metal sewing buttons and leather rivets for garment and leather work, and this article brings one example of each. Shapes and logos are made to the customer’s requirement, designed in CAD/CAM and prototyped with 3D printing before high-precision stamping dies are produced for each design. Every piece is inspected 100% in-house before shipment, with dimensions checked by vernier caliper and internal micrometer.

Glossy Black Sewing Buttons on a Coat Placket

Five glossy black Sewing Buttons run down the placket of a mid-grey coat. Black thread crosses through four holes set in a recessed centre, framed by a smooth, rounded rim.

The stitching sits inside the dish rather than above the rim, so the face stays neat. Glossy black against matte fabric gives a clean, understated contrast.

Suited to coats, jackets and tailored garments.

See our sewing buttons range →

Leather Rivet Posts Measured Before Shipment

Six Leather Rivet posts stand in a row beside a vernier caliper: flat round bases, hollow upright stems, identical in form.

With leather rivets, consistent posts are what make each setting on a strap come out clean.

We carry out 100% in-house inspection before shipment, measuring with vernier calipers and internal micrometers.

See our leather rivets range →

---

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.