Custom denim rivets, snap buttons and metal sewing buttons are judged on the face first — it is the part that stays in view once the garment leaves the line. This article looks at three of them at close range: a low rivet dome carrying a woven lattice, a four-part snap set with a cap polished until it mirrors the light, and a sewing button with a raised rim around a recessed four-hole well. Pattern depth, rim profile and finish are all set by tooling made for the job — drawn in CAD/CAM, prototyped by 3D printing and cut on CNC machines within the factory — and shapes or face detailing can follow a customer’s own design under OEM.

Jeans Rivet Head With a Woven Lattice

A single warm gold-toned jeans rivet head standing upright on dark wood against a near-black background, its low dome edged by a smooth rolled rim and its face filled with flat bands passing over and under one another, each band cut with fine parallel grooves.

A low dome with a smooth rolled rim. Across the face, flat bands pass over and under in a woven lattice, each cut with fine parallel grooves.

In this warm gold tone the recesses hold shadow while the raised bands catch the light, so the pattern still reads from a distance.

Jeans Rivet, product family JR. We would be pleased to discuss your requirements.

See our jeans rivets range →

A Snap Button Cap Polished to a Mirror

Four bright silver-toned snap button parts laid along the edge of a dark brown wooden block against a black background: an open ring part and a flanged part with a short upright tube at the back, a smooth domed cap polished to a mirror in the middle, and a deeper open ring showing a pale gold-toned interior at the front.

Four parts — cap, socket, post and stud. The cap is polished until it mirrors the light, with a rolled edge that runs smooth and unbroken all the way round.

That consistency begins at the die: drawn with CAD/CAM, prototyped by 3D printing, then cut to high precision on CNC machines within our own factory.

Every piece is inspected 100% in-house before despatch.

See our snap buttons range →

Metal Sewing Button on Ribbed Black Fabric

A round satin silver-toned metal sewing button stitched onto black ribbed fabric with pale grey thread crossed through four holes, the raised outer rim stepping down into a recessed centre well that holds the stitching below the surface.

The raised rim steps down into a recessed centre well, keeping the stitching below the surface and clear of direct rub in wear.

The satin silver-toned finish is even across the face, and every piece is inspected 100% in-house before shipment — consistent results across a production run.

Shapes and face detailing can follow a customer’s own design (OEM). We would be pleased to discuss your requirements.

See our sewing buttons range →

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.