A leather rivet manufacturer is judged on the parts a finished garment hides — the bore, the collar and the underside. This article looks at three of them at close range: a leather rivet whose stem rises from a flat round flange and ends in an open, burr-free bore, a jeans button read from below where turned rings step down around a central collar, and a four-part prong snap set carrying one consistent silver tone. Bore edges, collar openings and finish are all set by the tooling — drawn in CAD/CAM, prototyped by 3D printing and cut on CNC machines within the factory — and shapes or logos can follow a customer’s own drawing under OEM.

A Leather Rivet Bore That Stays True

A single brushed silver-toned leather rivet standing upright on dark charcoal felted fabric against a near-black background, its slim stem rising from a flat round flange marked with fine concentric rings and ending in a small open circular bore with a smooth rim.

This Leather Rivet post rises from a flat round flange and ends in a clean circular bore with a smooth, burr-free edge.

That open bore is where the cap takes hold, and a tidy rim lets the two halves close without catching.

Fine concentric rings run across the flange face, which sits level all the way round, holding the stem square.

We would be pleased to discuss your requirements.

See our leather rivets range →

Jeans Button Collar, Read From Below

The underside of a round jeans button in a bright polished silver tone resting on olive green woven fabric against a dark background, concentric turned rings stepping down from the rolled outer edge towards a short central collar that is open right through.

Concentric turned rings step down around a central collar, the edge clean and even all the way round — detail that only the underside shows.

The collar is open right through to take the tack pin during setting, while the flat base lies close against the fabric.

Shapes and logos are made to the customer’s own drawing — OEM work from design through to tooling.

See our jeans buttons range →

A Four-Part Prong Snap Set

Four bright silver-toned prong snap parts arranged in a line on a dark charcoal felt strip against a black background: a small domed stud, an open socket ring, a ring with upright pointed prongs, and a cap holding a faceted rose-pink insert inside its rolled rim.

A Prong Snap set comprises four parts — cap, stud, socket ring and prong ring. Each carries the same mirror-bright silver-tone surface, with rolled edges running clean and unbroken. The cap holds a faceted rose-coloured insert seated neatly within its ring.

Matching reflections let the set read as one piece on the garment.

Every piece is inspected 100% in our factory before despatch. We would be pleased to discuss your requirements.

See our prong snaps range →

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.