A metal snap button supplier in Thailand is read on small things: how a polished cap closes at the rim, how a socket cup holds its spring ring, how evenly a finish runs across one batch. This article looks closely at three components — a mirror-faced snap cap with its matching socket, a four-hole sewing button seated on a wool coat placket, and a plain domed leather rivet with a narrow flange and a short post. Form and finish both come from the tooling: drawn in CAD/CAM, prototyped by 3D printing, then cut as job-specific high-precision stamping dies on in-house CNC machines, with shapes and sizes made to a customer’s own drawing under OEM and every piece inspected in-house before dispatch.

Mirror Finish on a Snap Cap and Socket

A mirror-polished silver-toned snap button cap resting face up on dark indigo denim fabric, with its matching socket cup behind it, tilted to show concentric rings inside, a warm gold-toned inner ring and a round hole through the centre of the floor.

The front cap is polished to an even mirror face, the rolled edge closed smoothly round, with no tooling marks left.

Behind it, the socket cup shows the spring ring seated in its groove and a clean round hole through the floor — the result of high-precision dies designed in CAD/CAM and cut on in-house CNC machines.

A consistent surface keeps every Snap Button in a batch looking alike on the garment.

See our snap buttons range →

A Sewing Button on a Wool Placket

A satin silver-toned four-hole metal sewing button sewn with grey thread crossed through the holes onto the placket of a dark navy wool coat, its wide rounded rim raised around a recessed centre well, with a buttonhole out of focus behind.

A thin metal disc sits flat against heavy wool, so the placket closes cleanly rather than bulging; the rim is rounded, with no sharp edge against the cloth.

The four holes are punched clean through the recessed well, so the crossed thread sits below the rim. The satin silver-toned finish is even, and every piece is inspected 100% in-house before shipment.

Shapes and sizes follow a customer’s own design (OEM). We would be pleased to discuss your requirements.

See our sewing buttons range →

The Plain Dome of a Leather Rivet

A single gold-toned leather rivet cap photographed from the side on a plain dark grey background, its smooth unpatterned dome rising from a narrow flange ring, with a short solid post below the base.

The LR leather rivet has a plain cap, so any deviation in form shows at once. The curve must read symmetrical from every side, and the thin ring around the base even all the way round.

That ring is the face that meets the leather once the rivet is set, and the short post below is the anchor. In proportion, the dome sits upright rather than tilted.

We would welcome a conversation about your requirements.

See our leather rivets range →

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.