As a snap button manufacturer, Kiatsin produces spring-type, ring-type and 5-leg snap buttons, along with sewing buttons and leather rivets.

The three reach a piece in different ways. A snap is pressed closed and pulled open. A sewing button is held by thread through the holes in its face. A rivet is set through folded leather and stays fixed.

Face patterns are developed with CAD/CAM and prototyped by 3D printing, so a design can be seen in physical form before production begins. Each example below is shown in the position where it is used.

Snap Button on an Olive Jacket Cuff

Polished silver domed snap button fastened on the cuff tab of an olive green canvas jacket sleeve, with olive topstitching running along the tab and cuff, shown against a dark grey background.

The cuff tab of an olive woven jacket, closed with a smooth domed snap in a bright silver tone.

A light pull to open, a single press to close. The plain, polished face suits workwear-inspired garments.

Our snap range covers spring-type, ring-type and 5-leg snap buttons.

See our snap buttons range →

Four-Hole Sewing Button with a Textured Rim

Four-hole metal sewing button with a finely textured raised rim in a dark olive and gold tone, framing a smooth recessed dark centre, resting on charcoal herringbone fabric with two more buttons out of focus behind.

A fine raised grid runs around the rim in a dark olive tone with muted gold highlights, framing a smooth, dark centre with four holes.

On charcoal herringbone, the texture catches the light softly, giving a classic, grounded look suited to jackets, coats and darker tailoring.

Kiatsin develops face patterns with CAD/CAM and builds prototypes by 3D printing, so a design can be seen in physical form before production begins.

See our sewing buttons range →

Leather Rivets on a Folded Strap End

Dark brown leather strap folded into a loop and held by two domed rivets in a bright silver tone set side by side, photographed against a plain pale background.

The folded end of a dark brown leather strap forms a loop, held by two domed rivets in a bright silver tone.

The smooth, rounded heads show clearly on the deep brown leather while the piece stays clean and uncluttered.

Suited to bag straps, belts and other leather goods that call for a neat, visible fixing point.

See our leather rivets range →

Images are for presentation; the colour and finish of actual pieces may differ. Please confirm specifications with us before production.

For samples, OEM designs or a quotation, call +66-2-4510794 or send us a message through our contact form.